NOTE: If you receive a security warning, the “active content” used in this file enables the internet and document hyperlinks. To allow this, click the security banner (if present) and click “allow blocked content.”
Military AI Works RAAF Tindal Hornets Package
For FS 2004 / FS9
Project Manager: Mark Campbell
This package, from Military AI Works, features the Legacy Hornet squadrons of RAAF Tindal airbase. Tindal is currently home to F/A-18A/B Hornet fighters operated by No. 75 Squadron of the RAAF. Included in this package are 15 GAI NBAI F/A-18A and 1 GAI NBAI F/A-18B. These brand new AI models here at RAAF Tindal, are based on the original Nick Black F-18 source files, these F18 have been heavily RAAF’ed with brand new animations, effects and weapon load outs produced by the very talented AI modeller Andrew Hall. Also included in this package is the complete custom scenery of RAAF Tindal, and as a bonus RAAF Darwin (Darwin IAP), all produced in outstanding realism and quality. All the usual voicepacks, AFD’s and effects are supplied to MAIW standard.
(use hyperlinks to navigate)
1. About MAIW
Military AI Works (MAIW) is a loosely affiliated, international group of flightsim enthusiasts who share the common goal of seeing realistic military AI traffic in MS Flightsim. Our goals:
1) Produce only high-quality, freeware packages and products
2) Create military AI traffic accurately within the bounds of MS Flightsim
3) Promote new freeware military AI models, scenery and products
4) Advance military AI modeling of countries around the globe
5) Respect the rights of designers and contributors
To learn more about MAIW or to become a contributor, visit our website at http://www.militaryaiworks.com.
· Nick Black
FDE & Effects Design
· Mike MacIntyre
· Andrew Hall
· Mark Griggs
· Mark Campbell
· Stewart Pearson
· Mark Griggs
F/A-18 A and F/A-18 B
Step 1) Install this package
1a) Install the package in accordance with the on-screen prompts
Step 2) Remove duplicate AFD files
Open your “Flight Simulator 9/Addon Scenery/scenery” folder and remove any previously installed AFD’s for the following airports (e.g. “AF2_XXXX.bgl,” “AF2_XXXX_DEFAULT_XX.bgl” or “PAI_AF2_XXXX_DEFAULT.bgl”) NOTE: LEAVE ALL AFD's BEGINNING WITH “MAIW” as they were installed with step 1:
NOTE: Failure to remove these duplicate files may result in problems with AI aircraft parking and operation. It is recommended you move these to a temporary folder instead of deleting them; however, you should not need them again as the AFDs included in this package are thoroughly researched and highly detailed. If you are using add-on scenery for one of the above airfields, it is recommended you do NOT remove the AFD for the add-on scenery, but instead remove the MAIW AFD file (e.g. MAIW_XXXX_DEFAULT.bgl) after installation.
Note please only open AFX formatted AFD with Flight 1 Airport Facilitator X, opening the AFX formatted AFD with any other AFD program will lose important and needed data.
Step 3) Install callsign voicepacks
3a) If you don’t have the EditVoicepack 3.1 freeware installed, download it and install it by clicking here.
3b) Run EditVoicepack and import all vcpmod files included in with this installation
3c) Choose “Import” from the “File” menu
3d) Find the folder “Flight Simulator 9/Military AI Works/Australia/RAAF/RAAF Tindal Hornets/Voicepack Callsigns in the “Look in:” window
3e) Click “open” for each file
EVANS HEAD RANGE
SALT ASH RANGE
WOOMERA RANGE 1
WOOMERA RANGE 2
WOOMERA RANGE 3
3f) Update the Voicepack for FS9 by choosing “Update Voicepack” from the “File” menu--ensure the “Custom/Callsigns” box is checked in the left hand window. (note: the update may take a few minutes—do not attempt to start FS9 until the update is complete. Look for “Ready” in the lower left corner)
3g) When ready press save to keep the modifications
Step 4) Activate MAIW Scenery
Included in this package is the excellent freeware scenery for RAAF Tindal and RAAF Darwin. This scenery will be automatically placed into the correct directory for installation when you install this package.
1) The folder “MAIW RAAF Bases” have already been installed into the “Addon Scenery” folder of your FS directory. In order to activate this scenery you must start FS9, go to Settings and find the Scenery Library.
2) Click on “ADD AREA” and navigate to the “MAIW RAAF Bases” folder which should be, by default after installation, located in “Flight Simulator 9\Addon Scenery”.
3) Shut down FS and then when you restart the scenery will be installed and ready to use.
That’s it! You’ve successfully installed this package. Your AI traffic files will be automatically updated the next time you run FS9
Potential issue: FS9 AI traffic density set too low
Fix action: In FS9, set the AI traffic density slider to at least 10%.
Potential issue: Multiple AFDs active for the same airport
Fix action: Using Windows Explorer, open the folder “Flight Simulator 9/Addon scenery/scenery.” Look for duplicate entries for the following airport identifier:
Files may be named in several ways. The most common are “AF2_KXXX.bgl,” “AF2_KXXX_DEFAULT_XX.bgl” and “PAI_AF2_DEFAULT.bgl.” Keep the file names starting with MAIW and remove all others with duplicate airport identifiers.
Problem: “I can’t find the aircraft in the aircraft selection menu”
Issue: These are AI aircraft and have been programmed to not show up in the flyable aircraft selection menu
Fix action: If you simply must select these aircraft, use an editing program such as AirEd and change the Aircraft type from “2” to “0”
Potential issue: Callsign Voicepacks were not installed correctly
Fix action: Run the EditVoicepack software. Look for the following callsigns in the “custom modifications/callsigns” section of the program:
DELAMERE RANGE, EVANS HEAD RANGE, KATHERINE GORGE, LEARMONTH RANGE, SALT ASH RANGE, WOOMERA RANGE 1, WOOMERA RANGE 2, WOOMERA RANGE 3, YDW1, YEV1, YLE1, YPT1, YPW1, YPW2, YPW3 AND YWL2
If any of these are missing, choose “File/import” and open the appropriate .vcpmod file in the folder:-
“Flight Simulator 9/Military AI Works/Australia/RAAF/RAAF Tindal Hornets/Voicepack Callsigns”
Once this is complete, or if all callsigns are present, ensure the “Custom/Callsigns” box is checked in the left hand window and choose “File/Update Voicepack” to install them into FS9 (this may take a few minutes, do not open FS9 until the lower left of the EditVoicepack screen says “Ready.”)
Potential issue: You’re following your AI aircraft
Fix action: Stop following your AI aircraft. For some reason, a watched AI aircraft does not always behave the way it is programmed to. If you wait for the aircraft at the airport, it will arrive on schedule
This package was built by the Military AI Works online community. If you are interested in making Military AI traffic more realistic, visit this site!
The Flightplans are fictional, but have been researched via Internet and message forums. We have tried to make the plans as “realistic” as possible and have had to use our own judgment. Aircraft in this package fly to bases that may need you to download a separate AFCAD for the aircraft to show up there, AFCADs may be found at Avsim.com, Flightsim.com and the Project AI Afcad site
All Flightplans were created using Notepad.
Flightplans were installed using Lee Swordy’s TrafficTools freeware traffic compiler.
The callsigns used in this package are actual callsigns used by these units, based on information obtained in manuals and on internet.
All callsigns were created using the ingenious EditVoicepack freeware. This program is extremely simple and fun to use—if you need a new AI callsign, give it a try!
All AFDs were created using Flight 1’s payware Airport Facilitator X. Note please only open AFX formatted AFD with Flight 1 Airport Facilitator X, opening the AFX formatted AFD with any other AFD program will lose important and needed data.
The contents of this package should not adversely affect your FS9 or computer operation if installed according to the instructions. The authors make no guarantee and bear no responsibility for adverse operation or lost/overwritten files on your computer.
Use of Contents:
THESE FILES MAY ONLY BE UPLOADED TO AVSIM or FLIGHTSIM.COM BY THE AUTHOR(s)
THESE FILES MAY NOT BE UPLOADED TO ANY OTHER SITE WITHOUT THE AUTHOR'S WRITTEN PERMISSION. THESE MODELS, REPAINTS AND FLIGHTPLANS ARE FREEWARE AND MAY NOT BE SOLD, OR PUT ON ANY SITE THAT CHARGES FOR DOWNLOADING FREE FILES. THE FILES FOUND IN THIS ARCHIVE MAY NOT BE DISTRIBUTED ON CD OR ANY MEDIUM FOR ANY KIND OF FEE, INCLUDING THE COST OF PRODUCTION, MATERIALS OR POSTAGE. THE MODELS, REPAINTS AND FLIGHTPLANS OWNERSHIP REMAIN WITH THE AUTHORS AS MENTIONED IN THE PACKAGE
Upload to FSPLANET.com will never be allowed by Military AI Works.
Any questions, suggestions and feedback on the contents may be directed to the forums at www.militaryaiworks.com.
All information used to create this package was obtained via online, open-source research. All flight plans and schedules, while reasonable for military units, are fictional.
Thanks to everyone who made this possible.